Amazon

AD

Friday, August 28, 2015

Fairy Glitter Coaster DIY - Another Coaster Friday Craft Klatch

To stay up on the latest, be sure to 
You can click right HERE!  
Like my FACEBOOK page HERE!


It's time for another coaster Friday!  I picked Fairy Coaster out of the fishbowl last week.  Things did not go quite as well as planned.  I tried something a little different and my first attempt didn't go as well as hoped.  The second was better, but also, I might have done a thing or two a little better.  Oh well.....you can't win them all!



You will need:
-  Glitter - I used chunky black, fine blue, chunky silver
-  Transparency film  **FYI:  I have now been told by two fellow crafters that the inkjet  transparency film works great with the resin.  
-  Resin
-  Where I got the images for the fairies:  http://amzn.to/1KhjUR6
-  Circle cutter (optional)

Here is the video tutorial:







Directions:
1.  Prepare two ounces of resin an mixed in chunky black glitter, fine blue glitter and chunky silver glitter.  I think you can get away with one ounce, but just be careful about the amount of glitter you add, if you do.
2.  Pour into mold and pop bubbles with a lighter or a straw.
3.  Allow to cure a minimum of 12 hours.
4.  Print out the fairies on transparency film and cut to fit the size of the coaster cavity.
5.  Prepare more resin - I did one ounce - and pour into the mold.  
6.  Take your cut out image and press it into the resin, making sure all the bubbles are pressed out from under the transparency.
7.  Pop bubbles as needed.
8.  Allow to cure a minimum of 12 hours before unmolding.

That's it!  Thanks for stopping by!  Happy Crafting and stay safe!

Mona


Monday, August 24, 2015

Sheep Golf Ball DIY Recycling Craft Series Craft Klatch

To stay up on the latest, be sure to 
You can click right HERE!  
Like my FACEBOOK page HERE!


It's time for another golf ball critter!  Today we are doing a fluffy sheep!


You will need (affiliate links):
-  Golf ball:  https://amzn.to/2QYe9QP
-  Pom poms (small and medium):  
-  Black paint - I used spray paint:  https://amzn.to/2QZmnrK
-  Four golf tees:  https://amzn.to/2QUHFqz
-  Black felt:  https://amzn.to/2BmxYHG
-  Wood tag (from craft store):  https://amzn.to/2RYMD2S
-  Two googly eyes:  https://amzn.to/2Bmy5mL
-  Eye screw (optional):  https://amzn.to/2QUVBkj


Here is the video tutorial:






Directions:
1.  Drill holes into the golf ball for the legs.

2.  Put glue in the holes and then put in the golf tees.



3.  Drill a hole in the top and screw in the eye screw.


4.  Glue on the wood tag for the face.


5.  Once the glue dries, paint it all black and allow to dry.

6.  Cut two ear shapes out of the felt.  Glue onto the head.


7.  Glue on eyes.

8.  Glue the medium pom poms onto the body.




9.  Glue three small pom poms on the top of the head.

That's it!  I hope you like it!  Thanks for stopping by!  Remember:  Life's too short not to shimmer, so grab your glue gun and your glitter!™  Stay safe!

Mona




Friday, August 21, 2015

Paper Flower Coaster DIY - Another Coaster Friday

To stay up on the latest, be sure to 
You can click right HERE!  
Like my FACEBOOK page HERE!


I had the pleasure of doing a collab video this week, with my new friend Jenny, from JosTheBomb YouTube channel and OrigamiTree.com!  We decided on flower themed coasters.

Here is mine:


Here is Jenny's video:


 If you don't know Jenny, I think you should!  She has lots videos you should definitely check out!

Here is what you will need for mine:
-  White acrylic paint
-  Two different colors of scrapbook paper

Here is the video tutorial:





Directions:  
1.  Mix your resin according to the package directions.  You only need around once ounce for the base.  
2.  Mix white pigment and yellow and green pigment into the resin.  Adjust until you get the color you want.
3.  Pour into the mold and pop bubbles with either a straw, or lighter.
4.  Allow to cure at least 12 hours.
5.  Use a flower paper punch and punch out six flowers out of the lighter pink paper and six out of the darker pink paper.
6.  Using Super Gloss Mod Podge, apply it to the resin coaster and add the light flowers to the coaster.  Apply another layer of the Mod Podge over them.
7.  Place the darker flowers on top of, but offset on the lighter flowers and add another coat of the Mod Podge.
8.  Allow everything to completely dry!
9.  Using the end of a small paint brush, or a skewer to put a small dot of white acrylic paint in the middle of each flower.  Allow to dry.
10.  Mix more resin, according to the package directions  (another one ounce would be enough).
11.  Pour over coaster and allow to cure a minimum of 12 hours before unmolding.


Remember to stop by Jenny's website Origami.com and watch her coaster video!!




Thanks for stopping by!  Happy Crafting and stay safe!

Mona



Monday, August 17, 2015

Garbage to Gorgeous Episode #9: Chair Makeover DIY

To stay up on the latest, be sure to 
You can click right HERE!  
Like my FACEBOOK page HERE!

I found this disgusting beauty on the curb a couple of years ago.  Since then, it has been taking up residence in my garage. I liked the shape and the promise it held, but it’s time had come.  Bloom or face your doom!  

It was a 10+ on the gross meter.  It was filthy and the cushion was crumbling and disintegrating before my eyes!


For the project, you will need:
-  A crappy chair
-  Black gloss spray paint
-  Foam to replace current cushion
-  Quilt batting 
-  Staple gun
-  Fabric - I used a duck cloth because it is pretty durable

Here is the video tutorial where I show you how I did it! It's quick:





You want to start with a nasty old chair.




Step 1:  Take it apart.  Remove the musty, grungy, nasty cushion and get rid of it!! 




Step 2:  Clean it.  I first brushed it off.  Then I used some elbow grease, soap and water and left it to dry.



Step 3:  Paint it.  I used a spray paint that has a primer built in and would adhere to all surfaces.  It took about a can and a half for good coverage.  Let it dry.



Step 4:  While drying, you can start working on the cushion.  Find a pretty fabric.  I used a duck cloth fabric because it is pretty durable.  Cut out the foam for the cushion and I like to put a layer of quilt batting over it, which helps smooth the edges.



Step 5:  Face down, on a clean surface, place your fabric, your quilt batting, your foam piece and the seat base.  Trim around, but not too close.  You can always cut off the excess later.



Step 6:  Start to staple.  I started at the corners, going opposite to opposite and then the middle to the middle.  Then I followed along all the edges.  



Step 7:  Cut away the excess.

Step 8:  Reattach to the chair.


That’s it!  It doesn’t stink.  It isn’t nasty and I think it makes a beautiful accent chair!



What a difference!!!



Be sure to let me know what you think in the comments below.  Don’t forget to subscribe, so you don’t miss a thing!  

Thanks for stopping by!  Happy Crafting and stay safe!

Mona



Friday, August 14, 2015

DIY Clay and Resin Pizza Coaster Craft Tutorial

To stay up on the latest, be sure to 
You can click right HERE!  
Like my FACEBOOK page HERE!


I have been asked to make a pizza coaster for a while now.  I finally did it!




You will need (affiliate links):
-  Tan clay:  https://amzn.to/2QYXf4A
-  Red clay:  https://amzn.to/2S5sSqv
-  Brown clay:  https://amzn.to/2QEk9iq
-  Glow in the dark clay:  https://amzn.to/2SctwCM
-  Red acrylic paint:  https://amzn.to/2CijFp8
-  Round cookie cutter 4-5 inches in diameter:  https://amzn.to/2BqdHRv
-  Small cookie cutter for pepperoni: https://amzn.to/2BqdHRv
-  Resin:
FX Poxy:  http://amzn.to/2AF3Pkk ~ According to the manufacturer, this one is heat resistant to 500 degrees F.
These are other resins:
Easy Cast:  http://amzn.to/2yjYmBC
Art Resin:  http://amzn.to/2yk9X3z
Clear Cast:  http://amzn.to/2z4rxGw



Here is the video tutorial:




Directions:
1.  Mix half of the brown package of clay with half of the tan package of clay.  Mix well until you get a uniform color.




2.  Roll out the clay and cut with the large cookie cutter.  This will give you the base of the pizza.




3.  With the excess, roll it into a snake and create the crust around the edge.  Smooth it all together.  You want to make sure you have a lip that will allow the resin to stay in place when you pour it later, so make sure the crust does not have any holes.





4.  Roll out the red and use a small round cookie cutter to make the pepperoni.


5.  Use a craft knife to shave off small pieces of the glow in the dark clay to create the cheese.


6.  Texture the pepperoni.  Bake all the different clay pieces, according to your clay package directions.  Allow to cool.
7.  Paint red paint on the crust, to make it look like pizza sauce.  Allow to dry.

8.  Paint on the Super Gloss Mod Podge generously and then place all the pieces of the pizza in place.  I started with the pepperoni and then added the cheese.  The Mod Podge works as a glue.




Allow to completely dry.  You must let it completely dry, or you will end up with a cloudy film, forever!

9.  Prepare your resin, according to the package directions.

10.  Pour over the inner part of the pizza and allow to cure. 

11.  Pop bubbles with your lighter and if you get some that won't release from between the cheese, use a toothpick to help ease the out.

That's it!  Now you have a fun Pizza Coaster!


Thanks for stopping by!  Remember:  Life's too short not to shimmer, so grab your glue gun and your glitter!™  Stay safe!

Mona