Thursday, August 3, 2017

Emoji Poop Coaster DIY ~ Another Coaster Friday ~ Craft Klatch

So there is an Emoji Movie and in honor of it, I thought I would make an emoji poop coaster!

You will need:
Coaster mold:
Clear resin:
Transparency film:
Circle cutter:
Optional:  white resin pigment:
White curing resin:

Here is the video tutorial:


1.  I brushed a copper pigment powder in the mold to give it a brown tint.

2.  I mixed one ounce of resin, according to the package directions.  If you are doing clear resin, you can add a white pigment.  Or you can also use a resin that cures white.  Or you can pour a clear or colored background and let it cure, then paint it white before adding the next layer.

3.  I poured it into the mold, popped the bubbles and let it cure.  

Cure time is dependent on which resin you use.

4.  While that was curing, I printed out the emoji poop on transparency film.

5.  Then, I cut it out with my circle cutter.

6.  Once the resin had cured, I mixed one ounce of clear resin.   Poured it into the mold, on top of the white resin.

7.  I popped the bubbles with my lighter.

8.  I gently slid my emoji poop into the resin and pressed it down with my stir stick.  

Be sure to keep pressing until you have all the bubbles pressed out.

9.  I took my lighter and popped the bubbles.

10.  Allow it to cure for at least 12 hours before unmolding.

That's it!  Now you have a adorable Emoji Poop Coaster!!!

Remember:  Life's too short not to shimmer, so grab your glue gun and your glitter!™  Stay safe!


No comments:

Post a Comment

I always love to hear what you are thinking! I read each and every comment. Thank you for taking the time and stopping by!