Amazon

AD

Sunday, December 9, 2018

Patriotic Resin Petri Dish Coaster | Another Coaster Friday | Craft Klatch

Learn how to create a Patriotic Resin Petri Dish Coaster using resin and alcohol inks.  

Here is a quick video tutorial, so you can see exactly how I made it:




The links below help support this channel,  as I may earn a small commission at no extra cost to you.


You will need:
Similar mold:  https://amzn.to/2qvEyWP
Alcohol Ink set:  https://amzn.to/2r5nhUY
Resin (use whatever resin brand you like):
This is the resin I used for this project:
FX Poxy:  http://amzn.to/2AF3Pkk ~ According to the manufacturer, this one is heat resistant to 500 degrees F.
Clear Cast:  http://amzn.to/2z4rxGw



Directions:

1.  I mixed two ounces of resin and poured one ounce into the mold.

2.  I used a lighter to pop any bubbles.

3.  I poured the second ounce into the mold.

4.  I popped the bubbles with a lighter.

5.  I began dropping in alcohol ink.  I started with red.

6.  I then use the white ink and drop it onto the colors.

7.  I repeated with different colors.



8.  When you have all the ink you want to add in the resin, let it cure for a minimum of 12 hours.


9.  Once cured, I removed it from the mold.

That's it!  Thank you for stopping by!  Remember:  Life's too short not to shimmer, so grab your glue gun and your glitter!™  Stay safe!

Mona
















No comments:

Post a Comment

I always love to hear what you are thinking! I read each and every comment. Thank you for taking the time and stopping by!

Mona