Amazon

AD

Monday, March 18, 2019

DIY Easter Bunny Sign | Cricut Crafts | Craft Klatch

Learn how to make an Easter Bunny sign, using the Cricut cutting machine!  It's an easy holiday project!



Here is a quick video tutorial, so you can see exactly how I made it:  




Directions:


1.  I created a new project in Cricut Design Space.

2.  Watch the video above, to see exactly how I did it.  


3.  I cut it out with my Cricut.

4.  In the meantime, I painted my wood panel with a light purple paint and let it dry.


5.  In the meantime, weed the vinyl.


6.  Apply transfer tape to the vinyl.  

7.  Burnish it down.

8.  Remove the transfer tape from the backing.  You want to pickup the vinyl with it.



9.  Put the vinyl and transfer tape onto the dry board.

10.  Burnish the vinyl, to make sure it adheres well.

11.  Then, carefully pull off the transfer tape.


12.  Burnish down the edges again.

13.  I used the same purple paint to paint over all of the vinyl. I made sure to go in all directions.  This prevents any seepage of the next color.  Allow it to dry.

14.  Paint green over everything and let it dry.

15.  Once dry, start pulling off the vinyl.



16.  I glued pom poms on as bunny tails.

17.  Add bows.

That's it!


I hope you like it!  Remember:  Life's too short not to shimmer, so grab your glue gun and your glitter!™


Mona

No comments:

Post a Comment

I always love to hear what you are thinking! I read each and every comment. Thank you for taking the time and stopping by!

Mona