Friday, May 17, 2019

UnicornSpit Coasters DIY | Another Coaster Friday | Craft Klatch

Learn how to make a Unicorn Spit Coaster!  It's an easy resin coaster DIY!  #UnicornSpit and #GlazeCoat!   Their website:

You will need:

The links below help support this channel, as I may earn a small commission at no extra cost to you.

-  Wood squares:

-  Unicorn Spit Blue Thunder:  
-  Unicorn Spit Lemon Kiss:  
-  Unicorn Spit Pixie Punk Pink:  
-  Unicorn Spit Purple Hill Majesty:  
-  Unicorn Spit Dragon's Belly:
-  Cork:
-  Resin (use whatever resin brand you like):
Glaze Coat (top):
Easy Cast:
Art Resin:
Clear Cast:
This is the resin I used for this project:

FX Poxy: ~ According to the manufacturer, this one is heat resistant to 500 degrees F.

Here is a quick video tutorial, so you can see exactly how I made them:


1.  I found these wood squares at the craft store.

2.  I used Unicorn Spit in five different colors.

3.  I put two colors at a time, on my paint brush and put it on the wood squares.  They blend beautifully!

4.  I used a paper towel to wipe off the excess,

5.  I put the coasters up on cups.  I mixed two ounces of resin and poured it on the coasters.

6.  I used a sponge brush to move the resin around the coaster and to have more control.

7.  Once I had it all covered, I used a lighter to pop the bubbles and let it cure a minimum of 12 hours.

Now they look great and shiny!

8.  I did not to the back of the coasters, so I pulled out my cork shelf liner.

9.  I cut it to size.

10.  I peeled off the backing.

11.  I applied it to the back of the coasters.

12.  Rubbed it down.

That's it!  Now you have beautiful coasters that won't scratch your table.

Thank you for stopping by!  Remember:  Life's too short not to shimmer, so grab your glue gun and your glitter!™  Stay safe!


No comments:

Post a Comment

I always love to hear what you are thinking! I read each and every comment. Thank you for taking the time and stopping by!