Amazon

AD

Disclosure

As an Amazon Associate I earn from qualifying purchases.

Friday, August 2, 2019

Waffle Resin Coaster DIY | Another Coaster Friday | Craft Klatch

Learn how to make a Waffle Resin Coaster DIY!  It's a great fun with food breakfast craft tutorial!





Materials list:
The links below help support this channel,  as I may earn a small commission at no extra cost to you.

Waffle mold:  https://amzn.to/2LUoKdl
Amber pigment:  https://amzn.to/2OxzOPS
Brown pigment:  https://amzn.to/2SYsdZl
White pigment:  https://amzn.to/2SXPpqq
Gold pigment powder:  https://amzn.to/2OyHHVn
Copper pigment powder:  https://amzn.to/2OyHHVn
Transparency film:  https://amzn.to/313nl7Q
 Mixing cups:  https://amzn.to/2GG2K1K
Stir sticks:  https://amzn.to/2T2UuOf
White acrylic paint:  https://amzn.to/2LTTV8N
Parchment paper:  https://amzn.to/2yy48Pm
Resin (use whatever resin brand you like):
Easy Cast:  http://amzn.to/2yjYmBC
Art Resin:  http://amzn.to/2yk9X3z
Clear Cast:  http://amzn.to/2z4rxGw
This is the resin I used for this project:
FX Poxy:  http://amzn.to/2AF3Pkk ~ According to the manufacturer, this one is heat resistant to 500 degrees F.


Here is a quick video tutorial, so you can see exactly how I made it:




Directions:

1.  I used a copper pigment powder and dusted the recessed areas.  I wanted it to look like it was browned in a toaster, so I only did the areas that will be raised.  However, on the mold, that is the recessed areas. 

2.  I mixed three ounces of resin.

3.  I added colors to make it look like a waffle color.  I did that  by mixing gold and copper pigment powder.  I also added a white opaque pigment and made sure to mix it really well.




4.  I poured it into the mold.

5.  I popped the bubbles with my lighter and let it cure a minimum of 12 hours.

6.  Once cured, I removed it from the mold.

You can see the areas where I dusted the copper onto the mold.

You could be finished right now.  It would work as a coaster or even a fun soap dish!  But I wanted to take it a step further!

7.  I found a royalty free image of a melting pad of butter and printed it out on transparency film.

8.  I cut it out and made sure I did not leave a border.

9.  I painted the backside with white acrylic paint.  Be sure to do two coats.

After the first coat, it is streaky.

After the second coat, it's nice and solid.

10.  I mixed approximately two ounces of resin.

11.  I mixed a little amber pigment into the resin.  

 12.  I added just a touch of brown in an attempt to give it the color of maple syrup.


13.  Once mixed, I dipped the butter into the resin.  I wanted to make sure it was all covered, so it was protected and would stick to the waffle.  I am working on parchment paper because I can go more freeform and the cured resin will pull off of it.


14.  I then poured the remaining resin over the butter and waffle.

15.  I wanted it to look natural, so I let it run over the sides.


16.  I used my lighter to pop the bubbles.

17.  I peeled the resin off of the parchment paper.

There it is!  Now I have a fun waffle coaster!


Here is the back.

Perfect for your morning coffee, tea, or whatever you might drink for breakfast!

Thanks for stopping by!  Remember:  Life's too short not to shimmer, so grab your glue gun and your glitter!™  Stay safe!

Mona


No comments:

Post a Comment

I always love to hear what you are thinking! I read each and every comment. Thank you for taking the time and stopping by!

Mona