Halloween Resin Coasters ~ Monster Silhouettes | Another Coaster Friday | Craft Klatch

Learn how to create Halloween Resin Coasters, with monster silhouettes!  

Here is a quick video tutorial, so you can see exactly how I made them:



The links below help support this channel,  as I may earn a small commission at no extra cost to you.

You will need:
Mold:  http://amzn.to/2FcRd7J
Circle cutter:  https://amzn.to/2LEBSjR
Transparency film (laser):  http://amzn.to/2EjhvUz
Alcohol inks:  https://amzn.to/2OlqUn4
Resin (use whatever resin brand you like):
Easy Cast:  http://amzn.to/2yjYmBC
Art Resin:  http://amzn.to/2yk9X3z
Clear Cast:  http://amzn.to/2z4rxGw
This is the resin I used for this project:
FX Poxy:  http://amzn.to/2AF3Pkk ~ According to the manufacturer, this one is heat resistant to 500 degrees F.
Fast Cast (optional for white background):  https://amzn.to/2wTZ6wc
White pigment (optional to tint clear resin for background):  https://amzn.to/2QbPRiU
Witch royalty free image:  http://www.clker.com/clipart-witch-6.html
Frankenstein royalty free image:  http://www.clker.com/clipart-frankenstein.html

Directions:

1.  Mix two ounces of resin.  You can either use a clear curing resin and add white pigment and let it cure.  Or you can use a faster curing resin, that cures white, in about 15 minutes.  Either will work fine.  You want to have one ounce in each coaster cavity.

2.  While the resin is curing, print out the silhouettes and cut them out with a circle cutter.  TIP:  Cut on the side that is not printed on.  You reduce the risk of scratching the image.

3.  Once cured, you can start adding the alcohol inks.  You can add them in any pattern you want and any combination you want.  You can move them around with a skewer stick.  Then, let them dry.

4.  Once dry, mix two more ounces of resin and pour into the molds.

5.  Pop the bubbles with your lighter.

6.  Slide in your transparency images.

7.  Press them down with the stir stick.

8.  Pop the bubbles and let them cure a minimum of 12 hours.

Once cured, you can pull them out of the molds!  They have a classic look to them!

That's it!  Remember:  Life's too short not to shimmer, so grab your glue gun and your glitter!™  Stay safe!

Mona

Halloween Resin Eyeball Coasters DIY | Another Coaster Friday | Craft Klatch

Learn how to make eyeball resin coasters!  Great Halloween project for your holiday decor!

Here is a quick video tutorial, so you can see exactly how I made them:

The links below help support this channel,  as I may earn a small commission at no extra cost to you.

You will need:
Mold:  http://amzn.to/2FcRd7J
Transparency film (laser):  http://amzn.to/2EjhvUz
Resin (use whatever resin brand you like):
Easy Cast:  http://amzn.to/2yjYmBC
Art Resin:  http://amzn.to/2yk9X3z
Clear Cast:  http://amzn.to/2z4rxGw
This is the resin I used for this project:
FX Poxy:  http://amzn.to/2AF3Pkk ~ According to the manufacturer, this one is heat resistant to 500 degrees F.
Fast Cast (optional for white background):  https://amzn.to/2wTZ6wc
White pigment (optional to tint clear resin for background):  https://amzn.to/2QbPRiU
Brown Eyeball image:  http://www.clker.com/clipart-eyeball-brown-bloodshot.html
Green eyeball:  https://publicdomainvectors.org/en/free-clipart/Green-eye/56126.html


Directions:
1.  You want to start with a white background.  You need one ounce for each coaster.  You can either use regular resin and add a white pigment or you can a quick curing resin that cures white.  Mix your resin and pour it into the mold cavities.

2.  I printed eyeballs out onto transparency film.

3.  I cut them out with my circle cutter.  TIP:  Cut on the side that is not printed on.

4.  Once the resin has cured, you want to mix one more ounce of resin per coaster and pour it over the white.

5.  Use a lighter to pop the bubbles.

6.  Slide the transparency film eyeballs into the resin.

7.  Press them down with your stir stick.  Make sure you press out all of the bubbles.

8.  Pop the bubbles with your lighter.  Allow to cure a minimum of 12 hours.

9.  Once cured, remove from mold.

That's it!  Now you can keep an eye on your drink!

Thanks for stopping by!  Remember:  Life's too short not to shimmer, so grab your glue gun and your glitter!™  Stay safe!

Mona

DIY Textured Resin Coaster | Another Coaster Friday | Craft Klatch

Learn how to make a textured resin coaster using eyeshadow!  It's another great resin craft!

Here's a quick video tutorial, so you can see exactly how I made it:

The links below help support this channel,  as I may earn a small commission at no extra cost to you.

You will need:
Silicone mat:  https://amzn.to/2MQ7S7E
Eyeshadow:  https://amzn.to/2o5GjcB
Inkpad:  https://amzn.to/2wcuntT
Resin (use whatever resin brand you like):
This is the resin I used for this project:
FX Poxy:  http://amzn.to/2AF3Pkk ~ According to the manufacturer, this one is heat resistant to 500 degrees F.
Easy Cast:  http://amzn.to/2yjYmBC
Art Resin:  http://amzn.to/2yk9X3z
Clear Cast:  http://amzn.to/2z4rxGw

Directions:

1.  I found this silicone mat and it has a pretty design on it.

2.  I used an ink pad and rubbed it on the mat. 

3.  I mixed my resin.  You only need about an ounce to and ounce and a half.

4.  I split it into three different cups and then used powdered eyeshadow to color it.

5.  I poured each color and partially overlapped each time.

6.  I used my lighter to pop the bubbles.

7.  After about 45 minutes, I folded the mat onto itself.  Folding it allowed it to have the texture on both sides.

8.  After 12 hours, I unfolded it.

9.  I peeled it off the mat.

10.  Here it is.  You can see how the stamp pad allowed the design to be more defined.  

That's it!  Thanks for stopping by!

Remember:  Life's too short not to shimmer, so grab your glue gun and your glitter!™  Stay safe!

Mona